Update: based on several feedbacks, we changed the design from closed to open base. In addition, there are several additional features to new design.

The update was due to a larger cylinder (and deeper version) still being developed for large size user. If we made the base any bigger, it will become un-usable just to pass the larger size cyliinder through the opening.

The new design feature open front to slide the shaft through, which means you don't have to put the extender on first then apply the cylinder, which should make it much easier to apply the cylinder.

The base is much thicker for more coverage, providing more distrubuted load.

Depending on your thickness, you can slide throught or if its tight, pull the head up to make the shaft thinner. Should be easy once you get the hang of it.

Another user request - The rods can be locked into place via notches in the base. The metal dowel can be pushed into those notchs to lock or unlock(both side are open to push the metal dowel. Or you can push the rods into notches.

The head piece uses elastic cord. Based on feedback, it will now includes 2 gauge cords, thin cord for ADS and thick cord for higher force. The standard cylinder is rated for 6LB (for thick cord). The cord lock is now doubled for higher force (slip if not doubled).

There will be several attachments for our extender. The first one out will be multi-height V-stretch (low and high in one attachement). In the future, there will be peyronies attachement.

The VacExtender 5 will ship with the larger open base. All hardware was taken off from original KR Extender. However, those parts will also ship with your package in case you want to use the smaller base.